PVD 5840 DO

Supported Video Formats

• 2K 2048x1080p        23.98, 24, 25, 29.97, 30, 47.95, 48, 50, 59.94, 60
• HD 1920x1080p        23.98, 24, 25, 29.97, 30, 47.95, 48, 50, 59.94, 60
• HD 1920x1080PsF    23.98, 24, 25, 29.97, 30
• HD 1920x1080i         50, 59.94, 60
• HD 1280x720p          23.98, 24, 25, 29.97, 30, 50, 59.94, 60
• SD 720x625i             50
• SD 720x525i             59.94

• YCbCr 4:2:2
• 10 bit
• 3G-SDI Level A or B Dual Link

SDI Video Inputs / Outputs (electrical)

• Serial digital video SMPTE 292M, 424M, 259M
• Automatic video format and standard detection
• No.of Inputs 2 (second input optional)
• Connector BNC, 75 Ohms
• Return Loss
  • > 15dB (270Mbit)
  • > 10dB (2.97Gbit)
• No.Of Outputs 6 (one for channels 1 and 2, plus two for channels 3 and 4)
• Serial digital video SMPTE 292M, 424M, 259M
• Jitter
  • < 0.20 UI (270Mbit)
  • < 1.0 UI – Timing, < 0.20 UI – Alignment (1.485Gbit)
  • < 2.0 UI – Timing, < 0.30 UI – Alignment (2.97Gbit)

Video Inputs / Outputs (optical – optional)

• Signal Type SMPTE 297M – 2006
• Connector LC/PC (singlemode)
• No.of inputs 2 (one per channel)
• No.of outputs 2 (one each for channels 1 and 2)
• Wavelengths Non CWDM and CWDM versions available. Please see options

AES Audio Inputs / Outputs

• No.of Inputs / Outputs 8 (Individually assign 8 external channels as inputs or outputs)
• 8 x AES3 balanced
• Connector = Female 25 pin SubD, 110 Ohm balanced
• 4 v peak to peak nominal
• Coupling Transformer (isolated) inputs or outputs

Reference Input

• Analog bi-level (SDTV) or tri-level (HDTV)
• Auto-detect and cross lock compatible
• No of inputs 1 external, or 1 internal (rack frame reference)
• Connection BNC
• Impedance 75 Ohm

Video Processing

• Up to 3 frames of programmable delay in pixel/line/frame increments
• Separate delay provided for each output channel (4)
• Nominal Processing Delay
  • 1 frame (frame sync mode)
  • 5 line (line sync mode)
• Video adjustments Gain / Saturation / Hue / Black level per output channel
• ARC 2 channels of HQ aspect ratio conversion (SDTV mode only)
• 2 x Optional high quality up/down/cross converters
• Noise reduction 2 x high quality noise reducers (mosquito, block artefact, 2D/3D recursive)
• Color Correction 2 x RGB color correction stages with adjustable gain and black level

Audio Processing

• De-embedding All audio (16 channels) de-embeddded from each SDI input
• Input audio crossbar De-embedded and external AES on 24 x 24 AES input matrix
• Audio Processing 48 channels with adjustable gain/mute/phase invert and stereo mixdown and overload and silence detection
• Embedder output crossbar 16 channel mono matrix for each SDI output channel (4) (Source only from audio pathway 1 and 2 below)
• Sample rate converters Selectable ON/OFF (24) for each incoming AES (de-embedded and external)
• Audio delay + sync Automatic (tracking) with user offset adjustments
• Audio Pathway 1 20 x AES wide with full audio processing functions
• Audio Pathway 2 4 x AES wide with full audio processing functions + 4x DolbyE synchronizers
• Audio Pathway 3 Two 8 x AES wide per SDI input. Synchronized from the SDI inputs without audio processing
• External AES output matrix Select up to 8 x AES from any audio pathway

User adjustable audio delay

• Up to 1.3s (1300ms) total – provided via individually adjustable delays in various areas of processing path (refer to diagram) Note: These adjustments are offsets to the auto tracking delay timing compensation.

Operating Modes

• Frame Sync Dual channel frame synchronizer with full audio support. 1 frame min delay
• Line Sync Dual channel line synchronizer with full audio support. 0.5 frame min delay

Electrical Specifications

• Operating Voltage 12 VDC
• Power Consumption 34 W
• Safety IEC 60950/ EN 60950/VDE 0805

Mechanical

• Size 283mm x 78mm
• Weight Card module 200g (7 oz), connector plate 125g (4.4 oz)

Ambient

• Temperature 5°C to 40°C (41 F to 104 F) maintaining specifications
• Humidity 90% Maximum, non-condensing